Tweet
I have a 383 stroker that is in my 78 pro street chevy pickup and im Guaging intrest in it.thinking of selling the motor and putting the 355 back in..heres the details carb to pan.
78 2 bolt main thats been milled & decked
66 vette camelback heads cast# 461.and 1.94 .1.5 valve set
400 steel crank.balanced
750 holey mech secondaries
accel HEI super coil dist with 8 mm taylor wires
holley hi vol oil pump steel shaft
Keith black flattop pistons
Chrome Wp-Fp block off plate
march wp pulley and alt bracket
titanium push rods with Stock STYLE valvetrain -has over stock size springs
Double roller timing set
1 peice oil pan gasket engine has full arp bolt kit
Cam is comp cam hyd flat tappet with matching lifters with 3500-7000 rpm range lobe seperation and intake centerline are 110.0
intake side: adv dur is 305 duration @ .50 is 253 lift is 525..exhaust is the same
has 11:5:1 comp ratio
Also comes with 10 coian convertor 2800-3200 stahll comes with Flex plate also
i have some recipts but most were lost in a house fire a couple years back..EVERYTHING IS NEW only run time is about 1.5 hrs (break in) and just starting to move around.
cam part number is 12-214-4 grind number is 305H-10
asking 2800 for engine -headers stay with me truck has elec fuel pump but if you want it i have a brand new holley mech pump i could throw in...
This is just guaging intrest..Also will sell whole truck for 7500..Have over 12k invested.not like it matters lol EVERYTHING IS NEW JUST DIRTY FROM BODY WORK BEING DONE ON TRUCK
2012-02-06 19.39.23.jpg2012-02-06 19.39.40.jpg
78 2 bolt main thats been milled & decked
66 vette camelback heads cast# 461.and 1.94 .1.5 valve set
400 steel crank.balanced
750 holey mech secondaries
accel HEI super coil dist with 8 mm taylor wires
holley hi vol oil pump steel shaft
Keith black flattop pistons
Chrome Wp-Fp block off plate
march wp pulley and alt bracket
titanium push rods with Stock STYLE valvetrain -has over stock size springs
Double roller timing set
1 peice oil pan gasket engine has full arp bolt kit
Cam is comp cam hyd flat tappet with matching lifters with 3500-7000 rpm range lobe seperation and intake centerline are 110.0
intake side: adv dur is 305 duration @ .50 is 253 lift is 525..exhaust is the same
has 11:5:1 comp ratio
Also comes with 10 coian convertor 2800-3200 stahll comes with Flex plate also
i have some recipts but most were lost in a house fire a couple years back..EVERYTHING IS NEW only run time is about 1.5 hrs (break in) and just starting to move around.
cam part number is 12-214-4 grind number is 305H-10
asking 2800 for engine -headers stay with me truck has elec fuel pump but if you want it i have a brand new holley mech pump i could throw in...
This is just guaging intrest..Also will sell whole truck for 7500..Have over 12k invested.not like it matters lol EVERYTHING IS NEW JUST DIRTY FROM BODY WORK BEING DONE ON TRUCK
2012-02-06 19.39.23.jpg2012-02-06 19.39.40.jpg