Announcement

Collapse
No announcement yet.

a ton of stuff for v8 and v6 camaro, and corvette. obo on everything. needs to go.

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • a ton of stuff for v8 and v6 camaro, and corvette. obo on everything. needs to go.

    well i have a lot of stuff left over from the v6 to ls1 swap, and then including all the mods i did, i have a lot from it. everything i am listing is obo, so make an offer, i am willing to go down more if it is a pick up, if you need it shipped then you pay the shipping. all the parts are at my parents house in south lyon, but im going to school in ann arbor. i would be willing to meet someone an hour away. i dont have any pics on my computer, but would be willing to if you need me too. please note though if you do want pics i would have to take them when i go up there, which is about once or twice a week. i would consider trades on anything or a combination of things, i will list stuff i am looking for below. like i said before i am really willing to talk about prices, i always want to help another car lover out, but please dont make it insulting.

    misc.
    -4 stock v6 wheels and tires (almost new kelly gts, good winter tires or for roller). $150.00 *SOLD*
    -2 Bridgestone Potenzas 295/30/18 around 40% tread left. $75.00
    -98-02 red non-ram air (stock v6) hood good condition. $150.00
    -Rksport smoked headlight and taillight covers. good condition but used. $75.00 (cost $140 new and together) or $40 each seperate
    - 2 10inch pioneer 500w subs (ts-w250r). $40.00
    -trans-go 4l60e shift kit. still in box. $70.00 ($85.00 new)
    -stock 2000 camaro rs front lips, in red, they are beat up on the bottom but can be easily fixed. $100.00 *SOLD*

    ls1.
    -98-02 ls1 stock intake. $40.00
    -Professional Products Basic fuel rail kit never used(didnt fit my needs still in the box). $75.00 (cost $100.00 new)
    -stock valve springs good condition. make me an offer. i have no idea what to charge
    - 04 corvette camshaft. .479/.467 207/196 116 LSA. this would only be an upgrade for 98 and 99 f-bodies i believe. $100.00
    -stock oil corvette oilpan $50.00, oil pick-up tube $5.00, windage plate $10.00 or $60.00 for all of them *SOLD*
    -98-02 stock water pump. $50.00
    -93-02 driveshaft 1 piece. $75.00
    -98 camaro auto wiring harness and relay harness with trac control.$200.00 *SOLD*
    -04 corvette fuel rails, non-return style. $100.00
    -2 used oxygen sensors and harness. $20.00
    -98 v8 auto ecu. $40.00 *SOLD*

    v6.
    -99-02 v6 coated pacesetter headers brand new still in box, engine spun bearing before i could put them in. never used. $300.00 ($350.00 new)
    -98-02 v6 camaro radiator. $20.00
    -v6 stock airlid. $10.00 (talk to me about painting and/or airbrushing it for an extra charge)
    -2000 v6 ecu auto, with trac control. $30.00
    -2000 v6 camaro cluster with 9x,xxx miles. $25.00
    -drive by wire v6 pedal assembly. $15.00
    -msd 8.5mm msd spark plug wires. $35.00

    well there is my list. the trades i am looking for are stage 1 cnc ported heads, or a wet nitrous kit, and any performance suspension parts other then sub frame connectors (already have those). since i know nothing on this list is worth those, i would obviously add a couple of things or cash. my internet can be a little moody, so i will try to check everyday, but will at least once a week. my cell might be alot easier to reach me on since i always have it on me. the number is 734-216-9116. so make offers. message me or call me with any questions.
    Last edited by 00camaro16; August 3rd, 2009, 11:01 PM. Reason: sold wiring harness, ecu, oil pan, pick-up tube, windage plate, rs front lips
    Chris
    00camaro16@att.net

    2000 Camaro SS - ported and polished BBK throttle body, ls6 intake manifold, granatelli mass air flow sensor, Yank 3600 stall torque converter, Texas Speed Torquer 3 cam, hedmann headers and y-pipe, slp intake lid, magna flow cat-back exhaust, ported heads, dyno tuned. 11.53 1/4, ran only once.

  • #2
    -stock oil corvette oilpan $50.00, oil pick-up tube $5.00, windage plate $10.00 or $60.00 for all of them.

    If this pan fits my motor I would like all of it.
    Can you get me the part # off the pan?

    Can you send me pics in a PM?



    VicePresident of West Michigan Firebird Club
    A.K.A The Maverick
    http://www.cardomain.com/ride/660128/1
    93 TA Currently Under Construction AGAIN
    2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's

    Comment


    • #3
      I'm interested in those pioneer 10 inch subs any way you could get me a model number or a internet picture of which ones they are? Thanks
      sigpic
      1992 Chevy Camaro 25th Anniversary-SOLD
      1992 Chevy Camaro 25th Anniversary
      1997 Chevrolet Corvette

      The Original
      Originally posted by meissen
      I actually agree with Darren on everything he said...
      Originally posted by 81DaytonaPaceCar
      Yep, pretty much...not too often I agree 100% with Darren, but there it is...


      Comment


      • #4
        thats a v8 auto 98 engine harnesss?
        if so I may need it

        Comment


        • #5
          Originally posted by Phantom383 View Post
          -stock oil corvette oilpan $50.00, oil pick-up tube $5.00, windage plate $10.00 or $60.00 for all of them.

          If this pan fits my motor I would like all of it.
          Can you get me the part # off the pan?

          Can you send me pics in a PM?

          i can send you pics once i get up to the place where their stored, ill get the part # for you at the same time.
          Chris
          00camaro16@att.net

          2000 Camaro SS - ported and polished BBK throttle body, ls6 intake manifold, granatelli mass air flow sensor, Yank 3600 stall torque converter, Texas Speed Torquer 3 cam, hedmann headers and y-pipe, slp intake lid, magna flow cat-back exhaust, ported heads, dyno tuned. 11.53 1/4, ran only once.

          Comment


          • #6
            you interested in any trades ?

            i have a pro rc car to trade




            "LIVE AND DIE BY THE BOWTIE"


            Comment


            • #7
              Originally posted by Darrenscamaro View Post
              I'm interested in those pioneer 10 inch subs any way you could get me a model number or a internet picture of which ones they are? Thanks

              - 2 10inch pioneer 500w subs (ts-w250r). $40.00
              the ts-w250r is the part number. if you type it into google im sure youll find a pic.

              *edit-found pic for you the website is on the second page*
              Last edited by 00camaro16; June 28th, 2009, 11:11 PM.
              Chris
              00camaro16@att.net

              2000 Camaro SS - ported and polished BBK throttle body, ls6 intake manifold, granatelli mass air flow sensor, Yank 3600 stall torque converter, Texas Speed Torquer 3 cam, hedmann headers and y-pipe, slp intake lid, magna flow cat-back exhaust, ported heads, dyno tuned. 11.53 1/4, ran only once.

              Comment


              • #8
                Originally posted by 1BADAIR View Post
                thats a v8 auto 98 engine harnesss?
                if so I may need it
                yup thats it
                Chris
                00camaro16@att.net

                2000 Camaro SS - ported and polished BBK throttle body, ls6 intake manifold, granatelli mass air flow sensor, Yank 3600 stall torque converter, Texas Speed Torquer 3 cam, hedmann headers and y-pipe, slp intake lid, magna flow cat-back exhaust, ported heads, dyno tuned. 11.53 1/4, ran only once.

                Comment


                • #9
                  Originally posted by craig62989 View Post
                  you interested in any trades ?

                  i have a pro rc car to trade
                  sry the only trades in interested in are performance parts for my camaro.
                  Chris
                  00camaro16@att.net

                  2000 Camaro SS - ported and polished BBK throttle body, ls6 intake manifold, granatelli mass air flow sensor, Yank 3600 stall torque converter, Texas Speed Torquer 3 cam, hedmann headers and y-pipe, slp intake lid, magna flow cat-back exhaust, ported heads, dyno tuned. 11.53 1/4, ran only once.

                  Comment


                  • #10
                    Originally posted by Darrenscamaro View Post
                    I'm interested in those pioneer 10 inch subs any way you could get me a model number or a internet picture of which ones they are? Thanks
                    here is a website with a pic and description of the same ones.http://www.sonicelectronix.com/item_...+TS-W250R.html
                    Chris
                    00camaro16@att.net

                    2000 Camaro SS - ported and polished BBK throttle body, ls6 intake manifold, granatelli mass air flow sensor, Yank 3600 stall torque converter, Texas Speed Torquer 3 cam, hedmann headers and y-pipe, slp intake lid, magna flow cat-back exhaust, ported heads, dyno tuned. 11.53 1/4, ran only once.

                    Comment


                    • #11
                      also i will consider trades for any aftermarket suspention parts, minus subframe connectors (already have those)
                      Chris
                      00camaro16@att.net

                      2000 Camaro SS - ported and polished BBK throttle body, ls6 intake manifold, granatelli mass air flow sensor, Yank 3600 stall torque converter, Texas Speed Torquer 3 cam, hedmann headers and y-pipe, slp intake lid, magna flow cat-back exhaust, ported heads, dyno tuned. 11.53 1/4, ran only once.

                      Comment


                      • #12
                        ttt. this stuff needs to go. you can text my phone if that is easier for you.
                        Chris
                        00camaro16@att.net

                        2000 Camaro SS - ported and polished BBK throttle body, ls6 intake manifold, granatelli mass air flow sensor, Yank 3600 stall torque converter, Texas Speed Torquer 3 cam, hedmann headers and y-pipe, slp intake lid, magna flow cat-back exhaust, ported heads, dyno tuned. 11.53 1/4, ran only once.

                        Comment


                        • #13
                          Originally posted by 00camaro16 View Post
                          -stock oil corvette oilpan $50.00, oil pick-up tube $5.00, windage plate $10.00 or $60.00 for all of them
                          I'm also interested in the part number if you still have it.

                          Comment


                          • #14
                            Originally posted by cole View Post
                            I'm also interested in the part number if you still have it.
                            pm sent
                            Chris
                            00camaro16@att.net

                            2000 Camaro SS - ported and polished BBK throttle body, ls6 intake manifold, granatelli mass air flow sensor, Yank 3600 stall torque converter, Texas Speed Torquer 3 cam, hedmann headers and y-pipe, slp intake lid, magna flow cat-back exhaust, ported heads, dyno tuned. 11.53 1/4, ran only once.

                            Comment


                            • #15
                              hmmm, wonder if it was my buddy that bought the harness

                              Comment

                              Working...
                              X