Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
I have three autometer phantom gauges. Oil pressure, water temp, and trans temp. $35 shipped each OBO. I also have a dual guage pod that I will sell with the pillar so you don't have to cut yours up. Make offer.
sigpic
And another thing.....when I gun the motor, I want the whole world to think it's coming to an end. -Homer Simpson
Well I've been thinking about it and I'm not sure what I want to do with the car now. It is basically a roller with my 355 without the intake at the moment. I don't know if I am going to continue to part it out or try and sell as a roller. I don't think that I will be able to get very much out of it if I sell it as a roller but if I start parting it out more I will eventually be down to a shell and I don't have space/ability to keep that laying around. I do need to get rollin on this though so I can continue modding the maro. What do you guys think?
Last edited by 1bad83ta; February 26th, 2011, 10:34 AM.
sigpic
And another thing.....when I gun the motor, I want the whole world to think it's coming to an end. -Homer Simpson
did you list it on craigslist? I am sure you thought about it, either way man I hope it goes to a good home
99 Buick Regal GS- New DD
SOLD-1983 Firebird-305-2.5 inch custom bent exhaust w/ dynomax muffler-2004r-87 TA 3.08 posi-90 Camaro brakes-91-92 Hatch-87 TA bumpers and GFX-89 TA Tailights-87 TA front fenders-16 inch GTA wheels
SOLD-1967 Buick Skylark
Originally posted by ThreeHonks
I like having a loud car, every time the neighbors dog barks, I just go let my car sit and idle in the driveway
BTW. I was just reading through this thread and realized that this thread was one of the last threads WMCC Doug was part of before he passed. I don't even know if he was ever able to install the parts he bought. Really sad and almost eerie seeing his posts, almost like he were still around... RIP Doug.
BTW. I was just reading through this thread and realized that this thread was one of the last threads WMCC Doug was part of before he passed. I don't even know if he was ever able to install the parts he bought. Really sad and almost eerie seeing his posts, almost like he were still around... RIP Doug.
Yes I do.
And yes it is. I don't think he ever installed the HSR because he was waiting until spring.
sigpic
And another thing.....when I gun the motor, I want the whole world to think it's coming to an end. -Homer Simpson
Ok so I decided that I am going to be parting the car down and scrapping the shell. So pretty much anything and everything is for sale off of this thing. Some of the major parts are:
Harwood bolt on 3" cowl - black $300
formula wheels - 16 x 8 with Hankook Ventus tires on them with around 10,000 miles on them - make offer
I am going to be parting out the rear end,
Eaton posi in good condition - $250 This is the larger spline count, I think 28 splines. $522 new from jegs
Moser axles - $150 - These are 28 splines as well.
I will do $350 for both.
GM 3.73 gears - $75
Tubular lower control arms w/energy suspension bushings - $65 black
KYB struts - $45
Dart Iron Eagle Platinum heads 200cc intake, 64cc chamber, comp cams springs - SOLD
'87 355ci short block - Scat rods with arp rod bolts, comp XR276HR cam, sealed power pistons, stock crank, windage tray, arp main cap studs, fluidampr balancer. I have the documentation on this motor, was cleaned, magnafluxed, sonic tested at performance engineering in Jenison. - $700 This setup with the Stealth Ram made 407hp and 404ft-lbs
I also have the half serpentine system - make offer on parts.
Walbro 255lph intank electric pump, only a few years old still works good - $60
Coolant overflow bottle - $10
b&m trans cooler - $45
Aluminum Drums - make offer.
Jegster drive shaft loop - fbody specific - SOLD
Summit 1.5 aluminum roller rocker arms - $80
Fenders are in pretty good shape, they will need paint. Make offer.
Headlight motors work good - make offer
Taillights in good condition - make offer
Bumpers are good, no cracks etc - make offer
Autometer Phantom gauges - they are in a post above.
Any of the interior parts are for sale, car has tan leather interior with seats in good condition besides the normal boster wear on the drivers side. Power locks, windows, mirrors, hatch. Let me know if you need something particular.
I will try to get pictures as soon as I can but the car is at my brothers house in Jackson at the moment so when I get time I will get some pictures. If you need something specific I can probably have him take pics for me. I am sure I am forgetting some things so let me know what you need and I will see what I have.
All prices are obo and do not include shipping. I am on both sides of the state regularly so picking up shouldn't be a problem.
Last edited by 1bad83ta; March 16th, 2011, 05:45 PM.
sigpic
And another thing.....when I gun the motor, I want the whole world to think it's coming to an end. -Homer Simpson
Tweet
RIP Doug.
Comment