3" H-pipe w/ flowmaster mufflers

[doubleaction]

(fits pacesetter, and hooker headers) This is a true dual Hpipe with flowmaster mufflers. Dumps under the rear axel. $250

Will have pics asap.

[my1994z28]

I would like to see pics..

[doubleaction]

I would like to see pics..

ya i will have pics up tomorrow.

[1qwikSS]

if possible can you post a pic of the setup installed on the car. Im curious to see what route the exhaust follows under the car. Thanks.

[doubleaction]

if possible can you post a pic of the setup installed on the car. Im curious to see what route the exhaust follows under the car. Thanks.

I havent installed it yet. I just finished installing my hooker headers, and could not hook up the Hpipe due to the header touching the floor board....so right now im going back and forth with speedtweekerz (who i bought the headers from). This Hpipe was on my friends Ws6.

[ThreeHonks]

I havent installed it yet. I just finished installing my hooker headers, and could not hook up the Hpipe due to the header touching the floor board....so right now im going back and forth with speedtweekerz (who i bought the headers from). This Hpipe was on my friends Ws6.

speedtweekerz is a shitshow. they FORGOT to ship me my headers

[doubleaction]

speedtweekerz is a shitshow. they FORGOT to ship me my headers

whaaaaat....wow freakin bullshit man, and he asked to show him pics of the headers, so i send him pics twice and he never responded...im callin them tomorrow.

[doubleaction]

Pics are up!

[ThreeHonks]

whaaaaat....wow freakin bullshit man, and he asked to show him pics of the headers, so i send him pics twice and he never responded...im callin them tomorrow.

yeah. I called them after 2 weeks without them and they were like "oh sorry man, we just forgot about them... sorry" I definately wont be doing any more business with them!

[Virtue]

this will sound good but im sure loud inside lol, i made a setup just like this for tmr arb on here he likes it.my friend tim (smokeyrider05) has this on his t/a with a x pipe over the axle and out the back tho

[doubleaction]

this will sound good but im sure loud inside lol, i made a setup just like this for tmr arb on here he likes it.my friend tim (smokeyrider05) has this on his t/a with a x pipe over the axle and out the back tho

ya its loud, but has a nice deep rumble.

[JoeliusZ28]

yep you will want some sound deadener for sure. ive got 40s on a setup thats otherwise the same and it sounds AWESOME but the bass takes its toll on your ears.

[doubleaction]

yep you will want some sound deadener for sure. ive got 40s on a setup thats otherwise the same and it sounds AWESOME but the bass takes its toll on your ears.

Or you can angle it towards the ground with some tips.

[JoeliusZ28]

Or you can angle it towards the ground with some tips.

i did and that helped... but its still plenty loud enough to bother your ears.

some serious sound deadener, or running out the back will help more.

[doubleaction]

i did and that helped... but its still plenty loud enough to bother your ears.

some serious sound deadener, or running out the back will help more.

yeah true, i mean right now all im doing is running straight headers lol...and the only thing that bothers me is the center council rattles a lot

[doubleaction]

no1 need?

[99ls1]

What kind of mufflers are these?

[JoeliusZ28]

id say those are single chamber race mufflers - flowmaster 10 series

[doubleaction]

ttt

[Jays99Camaro]

to fit this setup on the car would you need to have the car lifted so it doesnt scrape or not

[doubleaction]

to fit this setup on the car would you need to have the car lifted so it doesnt scrape or not

No you dont have to lift it, i just dont suggest lowering it too much...my friends ws.6 was lowered about 2 inches (i think) over stock and it did scrape a little.

[JoeliusZ28]

to fit this setup on the car would you need to have the car lifted so it doesnt scrape or not

i clearanced the rear seat buckets an inch or two with a hammer but you cant tell from inside the car. Car is stock LT1 height which for the record is nearly an inch lower than an LS1 car is stock.

http://www.mifbody.com/vbulletin/imgcache/827.imgcache
http://www.mifbody.com/vbulletin/imgcache/828.imgcache
http://www.mifbody.com/vbulletin/imgcache/829.imgcache

[doubleaction]

^thanks for the pics man...it looks just like this

[Jays99Camaro]

do you still have this pipe,

[doubleaction]

yeah still got it.

[doubleaction]

this will sound good but im sure loud inside lol, i made a setup just like this for tmr arb on here he likes it.my friend tim (smokeyrider05) has this on his t/a with a x pipe over the axle and out the back tho

ttt

[Curt_irocz]

I wonder how close this would be on a 3rd gen with long tubes. I know Id have to modifie it a little. But this would be good to start with.

[doubleaction]

sale pending.

[PewterTA]

have you sold this yet? if not, call me. thanks. 248 495 5875

[Jays99Camaro]

i'll be there to pick it up tomorrow before 5 pm cause i work til 3,

[doubleaction]

!!sold!!