serpentine kit

[wezeles]

i would like to get a full serpentine kit for the engine before it all goes back together tossing belts at 6,500 or more isnt fun when you have to go looking for them...lol so if anyone has a 4.3 or a sbc serpentine setup let me know cant find shit at the local junk yards... dont need a/c just the basics... ill take it off just give me a price... or donate i dont mind taking hand outs

[archemedes]

Check with tiger in Flint they have a ton of parts, and are cheap

[MattODoom]

I have both aluminum serpentine brackets off of a 350 tuned port. I have the AC Compressor and PS pump with it (cant verify condition of either) no bolts for it though. Tensioner is there.

This is the kind that holds Alt, PS, AC and Smog, same as mine

Mine:


and here is the thread on using this setup without AC and Smog

http://thirdgen.org/techbb2/showthre...hreadid=274230

Enjoy!

[wezeles]

you want to get rid of them? i know how to run ac delete did the setup in my buddys truck... so basically you have everything but the alt and main pulley... thats cool i could just swap out my alt drive and im sure autozone has a center pulley or i could just get the under drive kit shipped in from summit all i really needed was the PS and the brackets... so let me know what you want for them and where your at... im over in Port Huron area right now.

[MattODoom]

you want to get rid of them? i know how to run ac delete did the setup in my buddys truck... so basically you have everything but the alt and main pulley... thats cool i could just swap out my alt drive and im sure autozone has a center pulley or i could just get the under drive kit shipped in from summit all i really needed was the PS and the brackets... so let me know what you want for them and where your at... im over in Port Huron area right now.

Ill try to go snap some pictures for you. Like I said, I cant guarantee either the PS pump or the AC Comp work, but they are there. Ill go check the condition and get you better details.

[MattODoom]

OK... it was in the snow bank beside the garage *cold hands*



Like I said, dunno if any of them work. Would definately not count on the AC Compressor, smog pump is junk anyways. But the PS pump should still be fine. If you just run alt and PS you can hack off the mounts for AC and Smog to just leave the idler pulley.

I dont know how much of a drive it would be for you or if it would be worth it but if you wanna come get them you could probably have them. Or if you happen to have a harmonic balancer around that is good, Im in dire need of one. The metal ring on mine is falling off the core.

EDIT: I also have a stock Serpentine Crank pulley laying around from when I put the underdrive on my car. Also have the underdrive serp alt pulley, since I used my stock one. You would then just need waterpump pulley. I wouldnt think an underdriven alt pulley would make much difference if you stick with the stock sized crank pulley.

[wezeles]

thats cool i cant find them anywere around here everyone uses them up... and to buy it new at auto zone isnt worth it... ill check yahoo maps see what kinda drive it is... i cant run the A/C anyway i have all my heat and blower motor all ripped out including the controls.. fits an indash monitor well though when you trim it out...lol and i wont use the smog eaither... so thats cool... what balancer do you need? i can pretty much get anything for a sbc i have a stroker balancer lying around and a pile of 305 350 balancers... what dia do you want?

[MattODoom]

Okay... it would no doubt be cheaper to just ship it. The brackets are fairly light, did you need just the PS pulley or the whole pump?

Im looking for a 350 standard stroke 6 3/4" outside diamete balancer in good shape. Like I said, mines falling apart.

[wezeles]

just the pulleys that you have i have brand new alt, PS, so if you can just send the brackets and the pulleys get me a price on shipping... do you have pay pal? i can just send you the cash that way... im sure the balancer wont cost much to ship... but i can send that to ya like i said i have piles of them... 8 inch 10 inch stroker 305 350 whatever you need...


6 3/4 i think i can handle that

[wezeles]

how soon do you need it? my cars not going anywhere till spring so im in no rush but if your still driving yours ill get that shipped out to you soon if you need it...

[MattODoom]

Suffice to say it's not going anywhere.

Ill have to borrow a PS pump pulley puller (say that 3x fast?) To get that out. Also, Ill have to check around for another reg crank pulley. Like to keep one hand incase I want to revert. But I do have the slightly larger(underdriven) alt pulley.

[MattODoom]

Actually... my dad's buddy will probably have a balancer lying around I can just pick up & save the shipping hassle. I'll let you know when I get ahold of him.

[wezeles]

thats cool whatever works i can get the pulleys at a decent price at any auto parts store so dont kill yourself..lol the power steering pump ones arnt fun to do... i almost lost a finger last year when i blew the rear seal out on my PS... got the new pump deceided to be cheep and just use the old pulley... ya it bent in like 3 places split in half and i went flying to the ground.. ahh great fun

[MattODoom]

So should I try to pull the pulley off for you? It has to come off either way to get the pump off, just a matter of trying to get it off smooth or introducing it to the torch.

[wezeles]

well you can try it i guess if it doesnt seem to go right away... just torch it... i dont want to be responsibal for any injuries...