True Dual Exhaust Systems available at Huron Speed!

[popo8]

From what I am gathering, one side should bolt up nicely and the other requiring a couple minor mods. All in all not too difficult.

Here are some threads I found on the topic for you:

http://www.ls1lt1.com/forum/lt1-%7C-...rue-duals.html

http://ltxtech.com/forums/showthread...and-True-Duals

Thanku for the response... never got a notification that u did... so I appologize.

[Superman09]

From what I am gathering, one side should bolt up nicely and the other requiring a couple minor mods. All in all not too difficult.

Here are some threads I found on the topic for you:

http://www.ls1lt1.com/forum/lt1-%7C-...rue-duals.html

http://ltxtech.com/forums/showthread...and-True-Duals

[popo8]

Im not sure if this was asked already (at work, so only looked at the first page quick).

How far off are these to use on and LT1 camaro with LT pacesetters?

[zeeman]

Yeah, I just had to get the right hangers and spend a couple minutes on some modifications to them. For some reason my cell phone wont really pick up the sound of the engine that well. I can hear the slight lifter tick and all the belt noise great but not the exhaust. Frustrating. Ive shot 6 quick videos trying to get some decent sound, but my stupid phone focuses on the higher pitched noises, and picks up almost none of the exhaust note.
So this last one picks up some, lets see if I can get it to load, then Ill post the link here.

here ya go.

[JoeliusZ28]

Ground clearance with any true dual setup is going to depend greatly on the attention to detail given to the installation. A good exhaust guy can usually add a couple tweaks to get the most out of it.

Looking forward to some sound clips!

[meissen]

You'll have to upload it straight to youtube and then link us to it here.

[Superman09]

Excellent, glad you like it!! Enjoy!!

[zeeman]

Lol. Im working on it. I keep getting, "file is to large" error messages.

[formula218]

sound clips!?!

[zeeman]

Righty, I rehung it and fabed some hangers for the tail pipes. That picked it up a couple inches. Love the way it sounds! Many thanks.One thing you may want to address with the manufacturer. On one tail pipe, they weld on a little name plate. Its upside down lol.

[Superman09]

I am unsure of exact measurements but as with any true dual system, it will hang on the low side as there is no tunnel on these cars to fit a dual system.

[zeeman]

How low is this system supposed to hang?

[zeeman]

Its here! It looks pretty good, quality stuff. Thanks for getting this straightened out Jon. And as a bonus, it came with stickers! Cant ever have to many stickers!

[Superman09]

Received, thanks!!

[zeeman]

Order placed.