FS: Front Fender, Driveshaft Loop, Cutout

[DETROITMUSCLE]

Brand new front driver side fender that I bought for my car and ended up not using. It should fit any firebird, trans am, or forumla from 93-02 (I think some of them don't have the vent holes at the bottom though)

http://www.mifbody.com/vbulletin/imgcache/299.imgcache

$125


Driveshaft Loop, required for all cars running 13.99 or faster at the strip. I believe its a BMR but can't confrim this as there is no PN on it, but it does adjust and worked great on my car with no clearance issues.

http://www.mifbody.com/vbulletin/imgcache/300.imgcache

SOLD

3" cutout from Summit it has some extra piping left over from the stock y-pipe but that can easily be cut off.

http://www.mifbody.com/vbulletin/imgcache/301.imgcache

SOLD

[1qwikSS]

what would i have to do in order to make the cutout fit on my stock piping (2000 SS non SLP)...if its not a huge ordeal i will take it!

[kyleozzie]

interested in the driveshaft loop, where abouts are you? maybe i can just come pick it up?

[DETROITMUSCLE]

what would i have to do in order to make the cutout fit on my stock piping (2000 SS non SLP)...if its not a huge ordeal i will take it!

The stock piping is 2.75" and this is 3" so you could just have it welded in or try and find some reducers for the ends. Its welded to the stock 2.75" piping right now.

The parts are up at my work at 23 and schonerr but I only live like 2 miles away so I can grab them whenever.

[c0ncEpT]

I had that cutout in my stock catback. Just some welding is all thats really needed. You could get reducers but good luck finding 3-2.75

[Darrenscamaro]

If Chris doesnt take the cutout let me know I would be interested.

[1qwikSS]

You could get reducers but good luck finding 3-2.75

That was what i was getting at.....if i can weld the .25" gap then thats no big deal....but if i would have to find a .25 reducer...it may not have been worth my time to do it...ya know....pm sent.

[DETROITMUSCLE]

driveshaft loop has been sold, thanks Kyle.

[JoeliusZ28]

lol, loops are required for 13.99 and faster?

oops!:lol:

[Formula Z]

since when are driveshaft loops required for 13.99 and faster isnt it 12.99 and faster. ive never been asked if i had one or heard anyone mention it til now

ok i did google it and find that it is 13.99 and faster for rwd cars. damn now i know. guess i better be getting a new torque arm with one

[DETROITMUSCLE]

lol, loops are required for 13.99 and faster?

oops!:lol:

lapeer says 13.99 and faster but they could give 2 shits, but any track that does may or may not care and I'd rather not get the boot for a cheap part. The official rules may say 12.99 (I'm not sure) or faster but its cheap insurance.

[Formula Z]

yeah i found it is 13.99 and faster

[JoeliusZ28]

yea im probably going to have to make one custom to clear my duals. i need to remember to do that before spring.

even if it is 12.99, ive bested that already too haha.

[kyleozzie]

No problem, thank you!

[DETROITMUSCLE]

cutout has been sold to Chris