Tweet
Well the dude who did it(the rear) said 5k was out of warranty or some bs. So, im heading out to the garage to jack it up and drop that thing. Have no clue how....wish me luck!
-
-
It's very simple. You'll have it out in about an hour.2005 Yamaha R6
1999 Pontiac Trans Am - LS1 - M6 - ITSSLOW - 12.998@109.59 - SOLD
1994 Chevrolet Camaro - 3.4L - M5 - ITSSLWR - 16.558@85.38
2003 Chevrolet Blazer
2001 Yamaha YZ426F
-
Piece of cake!
Get her up in the air and let the rear hang down and you'll see what has to be done.
Just a side note but the rear will want to swing down when you take the torque arm off so before you do that get a jack under it.
VicePresident of West Michigan Firebird Club
A.K.A The Maverick
http://www.cardomain.com/ride/660128/1
93 TA Currently Under Construction AGAIN
2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73'sComment
-
yeah def get a jack under it, piece of cakesigpic
The LS1 or Go Home Crew
ASE master certified
1998 Camarbo z28-going back to stock
11.3@121 old heads & cam setup
Comment
-
WHen I did mine the Torque arm was the last thing I did and droped the rear with it attached.
Worked well!
VicePresident of West Michigan Firebird Club
A.K.A The Maverick
http://www.cardomain.com/ride/660128/1
93 TA Currently Under Construction AGAIN
2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73'sComment
-
when i took mine out everything was so easy just use a nice impact and everything comes out like a charm-Mike
Chevrolet Technician
Totaled 99 SS swapped drivetrain, harness, interior, and suspension into 94 Z28.
Comment
-
what does this mean?
This is right at the end of the driveshaft going into the rear....
Comment
-
bump. someone helpComment
-
Moved to the driveline forum.Western Michigan Camaro Club ~ President
1987 Camaro IROC-Z Pearl White & Black w/ Red Pearl, 355 TPI, A4, 3:42, AirRide,"GOMARO"2017 Silverado Double Cab Z71 Pepperdust Metallic, 5.3, A6, 3:42, "SASYZ71"WMCC Website www.wmcamaro.org
2005 Pontiac Grand Prix GT White, 3800
"A government big enough to give you everything you want,
is strong enough to take everything you have." — Thomas Jefferson
"Democracy will cease to exist when you take away from those who
are willing to work and give to those who would not." — Thomas Jefferson
Comment
-
Looks like a busted pinion to me.Originally posted by 86Camaro View Postwhat does this mean?
This is right at the end of the driveshaft going into the rear....Western Michigan Camaro Club ~ President
1987 Camaro IROC-Z Pearl White & Black w/ Red Pearl, 355 TPI, A4, 3:42, AirRide,"GOMARO"2017 Silverado Double Cab Z71 Pepperdust Metallic, 5.3, A6, 3:42, "SASYZ71"WMCC Website www.wmcamaro.org
2005 Pontiac Grand Prix GT White, 3800
"A government big enough to give you everything you want,
is strong enough to take everything you have." — Thomas Jefferson
"Democracy will cease to exist when you take away from those who
are willing to work and give to those who would not." — Thomas Jefferson
Comment
-
Wow looks like it broke off with the driveshaft still attached, like he said broken pinion or you snapped it off right at the housing.
Comment
-
got the diff cover off,
took 4 bolt outs and the clamps came off,
how do i get the axle shaft out??
heres what it looks like.
what do ya guys think?Comment
-
Originally posted by 86Camaro View Postgot the diff cover off,
took 4 bolt outs and the clamps came off,
how do i get the axle shaft out??
heres what it looks like.
what do ya guys think?
Look at the Diff assembly there should be a large pin pointing up and down you have to remove that and the covers that are holding the bearings in place have to come off also then the axle should slide out
Comment
-
wheres the pin located exactly?Comment
-
What bearings?Makin Torque.Comment
Comment