Hey everyone I'm new to f bodies I just picked up a clean 96 Camaro v6 going to do a lt1 swap I already had but I don't have the computer what would I need to get to get that motor running also does the v6 Camaro have the right transmission for a straight bolt on. It's an automatic. Thanks in advance
Announcement
Collapse
No announcement yet.
Lt1 swap
Collapse
X
-
Regular
- December 4th, 2009
- 131
- Mark S.
- '94 Formula, '94 Astro LT1
- Byron, Mi
- Senior Designer 3D CAD using UGNX at GM's Milford Proving Grounds
- Send PM
What V6? 3.4? The 3.4 has the narrow "metric" bolt pattern. The LT1 will not bolt to it.
For a computer I wouldn't waste my time with finding a good OEM unit. Too many things to go wrong with them and they are difficult to program. Burning a chip is the only way to do it and, with my experience, you may get one good chip out of 50 tries... Look into the DIY Auto Tune Mega Squirt ECM. Easily programed with a laptop and infinitely tuneable. https://www.diyautotune.com/support/...ch-megasquirt/
Going with 2004R or 700 r4 AOD trans you won't need the computer to control it as these are TV Cable controlled.
Mark2002 C.E. WS6 RA TA- Yellow #190 of 2391
1995 GMC Sierra Custom Pickup-White with pearl blue stealth flames
1994 Formula V8-Red
2000 Monte Carlo SS-Galaxy Silver
2001 Astro- The wifes DD
2004 Astro- My DD
1992 Astro (291K) Gave to my brother-in-law... still going strong
Comment